Plumbing Tips Every Melbourne Homeowner Should Know
Moving into a new home is exciting. However, many homeowners do not realize how fast plumbing problems can happen. As an award-winning local plumber, Jet Plus Plumbing has helped many locals avoid costly mistakes by teaching them some plumbing basics.
If you have a burst pipe, gas leak, or blocked toilet, here are five plumbing tips every homeowner should know. Plus, there’s a bonus tip that could save you a lot of money.
1. Know How to Turn Off Your Water Meter
When a pipe bursts or leaks, your first move should be to shut off the main water supply. You usually find the meter near the front boundary, footpath, or driveway.
Tip: In a plumbing emergency, turn off your water meter quickly. This helps reduce damage and lets your plumber start repairs faster.
2. Learn How to Shut Off Your Gas Meter
Gas leaks are dangerous. If you smell gas or hear hissing near a gas appliance, leave the area. Then, turn off the gas meter. The gas meter is usually on the side of the house.
Gas safety tip: Always call a licensed Melbourne plumber if you suspect a leak. Never try to fix a gas issue yourself.
3. Know Where Your Stormwater Legal Discharge Point Is
After heavy rain, blocked stormwater drains can cause major problems. Knowing where water exits your property, usually a kerb outlet or rear easement, helps diagnose issues faster.
If you’re experiencing slow drainage or water pooling, check out our guide: Drainage Solutions for a Backyard That’s Always Muddy
4. Locate Your Sewer Discharge Point or Boundary Trap
This is where your home connects to the sewer system managed by the local water authority. If your toilet or drain is backing up, finding the source helps you know if it’s your problem or the water authority’s.
For serious blocked drains, this can speed up repairs and help reduce costs.
Learn more by reading this blog: Signs You Need a Sewer Line Repair
5. Know How to Turn Off Your Hot Water System
If your hot water unit starts leaking, switch it off at the switchboard for electric systems or the gas valve for gas systems. You can also isolate the water supply to stop further damage.
Our hot water experts can explain how your hot water system works. They will also give you personalized advice during a service visit. This is all part of our professional hot water services in Melbourne.
Learn more: Melbourne Plumber’s Guide to Hot Water Services
Bonus Tip: Install Isolation Valves at Fixtures
Install isolation taps at toilets, sinks, and washing machines. These let you shut off water to one fixture instead of the whole house. It’s a smart way to improve control, save time during repairs, and prevent larger water leaks.
Need Help? Call a Local Emergency Plumber in Melbourne
Jet Plus Plumbing does more than unclog blocked toilets. Our Melbourne plumbing team is available 24/7 for emergency repairs, hot water installations, leak detection, and general maintenance.
Call us today at 0421 725 624 or book online for fast, honest, and reliable service in any emergency.
